
ESC Boards, GPS, Sensors & Cables
DJI Mavic 3 / 3 Pro Front Upper Fisheye Sensor Module
$10.09
from $9.08 at 10+

1 / 5
DJI · SKU DJ13130 · Fits 3 models
$19.93
per unit| Quantity | Unit price | Saving |
|---|---|---|
| $19.93 | ||
| $18.93 | −5% | |
| $17.94 | −10% |
Shipping weight 0.2 kg
Match the model number printed on the device (Settings → About, or on the back) before ordering.
If a Mavic 3 loses its live view only when the gimbal tilts down, or throws a gimbal error that comes and goes, the signal flex is a prime suspect. It carries power and data between the gimbal camera and the main control board and bends every time the camera moves.
This gimbal signal flex cable is listed for the DJI Mavic 3, Mavic 3 Cine and Mavic 3E. With no maker given, it's an aftermarket part.
Update firmware and restart the drone and controller.
Tilt and pan the gimbal and note whether the feed drops at certain angles.
Inspect the flex for creases, tears or burnt contacts.
Check whether recorded files are also corrupted; if so, the fault lies on the drone side.
Follow the original route exactly and leave the same slack so the cable never pulls tight. Seat connectors evenly and close the locks fully before testing.
Calibrate the gimbal and record test footage across the full tilt range. If the feed still drops, inspect the camera and the main board connector next.
| Compatible devices | DJI Mavic 3, DJI Mavic 3 Cine, DJI Mavic 3E |
|---|---|
| Part type | Gimbal signal flex cable |
| Quality | Aftermarket (DJI origin not stated) |
The listing doesn't state DJI origin, so we sell it as an aftermarket cable.
The listing doesn't name the Classic.
Yes. A damaged flex often causes faults that come and go with gimbal movement.

ESC Boards, GPS, Sensors & Cables
$10.09
from $9.08 at 10+



ESC Boards, GPS, Sensors & Cables
$12.73
from $11.46 at 10+

Gimbal & Camera Parts
$18.00
from $16.20 at 10+



Gimbal & Camera Parts
$8.21
from $7.39 at 10+




Price from $19.93