DJI Air 2S Gimbal Roll Lower Arm Bracket / Limit Cover

On the DJI Air 2S, the roll motor sits on a lower arm bracket, and a small limit cover stops the gimbal from rotating past its safe range. A crash can bend the bracket or snap the cover, and the gimbal then tilts, sticks or swings too far. This listing sells the two parts separately.

Choose Limit Cover or Roll Arm. The listing names no maker, so both are sold as aftermarket.

Which Air 2S part has failed?

• Limit Cover: the gimbal rotates further than it should on the roll axis, or the cover is cracked or missing.

• Roll Arm: the lower arm is bent or cracked, the horizon stays tilted after calibration, or the roll motor sits loose.

Fitting tips

Look closely at both parts with the gimbal cover off; a bent arm is easiest to spot when compared with a straight edge. Transfer the roll motor carefully and avoid pulling on the gimbal flex. After reassembly, power the drone on a level surface and run a gimbal calibration.

Replacing just the damaged piece keeps an Air 2S gimbal repair quick and inexpensive.